VIRTUAL LIBRARY
Cliff Hanger Virtual Library - Images and information on the major components

MANUALS
Cliff Hanger - Manual (22 pages) - SEE CORRECTIONS AND REPLACEMENT PAGES IN THE FOLLOWING ADDENDUM
Cliff Hanger - Manual Addendum (6 pages)
Cliff Hanger - Manual Rev. 3 (31 pages)

SCHEMATICS
Cliff Hanger / Goal to Go - Schematics (11 pages) - PAGE 9 IS AN UPDATED REVISION OF PAGE 8

DIP SWITCH SETTINGS
Cliff Hanger - DIP Switch Settings

ROM IMAGES
Cliff Hanger - ROM Images
Cliff Hanger - ROM Images (alternate - 1st set)
Cliff Hanger - ROM Images (alternate - 2nd set)
Cliff Hanger Overrun fiX - Made in 2014, this ROM set provides audio/video clean-up and adds a DIP switch setting for unlimited lives.

 

 

Compatible Laserdisc Players - Pioneer PR-8210, Pioneer PR-8210-A*, Pioneer LD-1100*

* The Pioneer PR-8210-A and the Pioneer LD-1100 laserdisc players are not original to Cliff Hanger. To see how to use them as alternates, see the LD Conversion for Cliff Hanger. For more information on how the PR-8210 communicates with the game, check out the PR-8210 / PR-8210-A page.

Pioneer PR-8210 - Operating Instructions (26 pages)
Pioneer PR-8210 - Service Manual Supplement (6 pages)
Pioneer PR-8210 - Command Set Info
Pioneer PR-8210-A - Service Manual (118 pages)
Pioneer LD-1100 - Operating Instructions (19 pages)
Pioneer LD-1100 - Service Manual Supplement 1 (54 pages)

Aftermarket Conversion Cards - Various Laserdisc Player Conversion Products have been developed over the years to allow replacement/upgrade of the laserdisc player.

 

 

Technical Notes - The document "Technical Notes on Cliff Hanger" written by James Bright of QuarterArcade.com explains the theory of operation for Cliff Hanger.

Laserdisc Audio/Video Overruns - The Cliff Hanger Overrun fiX ROM set is a 2014 modification that corrects occurrences of laserdisc audio/video playing for too long after the end of all main sequences and death scenes. An option for unlimited lives has also been added to DIP switch 27.

Interchangeability - Goal to Go can be played in a Cliff Hanger cabinet by changing the disc and the ROMs. There is also a conversion kit that allows Cobra Command to be played in a Cliff Hanger cabinet. This kit came with a dedicated Cobra Command PCB and also a laserdisc controller PCB to allow operation with the PR-8210, and it requires an adapter for the wiring harness.

Manufacturer:
Stern Electronics, Inc.
(USA, 1983)

Emulation and Ports
Virtual Library
Game Info

Message Board
Locations
Chat Room

 

QUESTIONS? COMMENTS? PROBLEMS?
Contact Us

HOME | LASER GAMES | LASER COMMUNITY | TECH CENTER

This website was created by
Jeff Kinder & Dave Hallock, 1997 - 2024.
All trademarks and copyrighted materials are property of their respective owners.